I’ve had my share of well issues over the last three years. I’d never have guessed the easy one would have been that time two years ago when I suddenly started pumping sand up from deep below the front yard. Raising the pump a dozen feet solved that problem and for a while I was back to enjoying clear, sweet water from the depths. 

That continued to be true right up until I started seeing the infamous “black specks.” Those specks, upon closer inspection, included legs, antenna, and various other ant pieces that made their way down to the pump and through the filters. That led to installing bigger, badder filters to mitigate the flow and hiring a series of pest control experts to eliminate the problem at the source. I sent the exterminators packing when their proposed solution was seeding the entire yard with bait stations and dumping the industrial equivalent of Raid into my primary water source.

After those three consultations, I knew I was on the hunt for a mechanical solution. The best possible course of action, replacing the well cap, has been in the works for nine months – with my go to plumbers scouring the supply warehouses of the world for the right replacement cap. I only put them on the job after I failed miserably over a period of weeks at finding the right parts. You wouldn’t think finding a cap or even just a replacement gasket for a four inch well would be so difficult, but it’s gone on for three quarters of a year. After much waiting and burning through many filter cartridges, they arrived today with a shiny new 4-inch well cap… that didn’t quite fit. 

Their work through most of the morning, did confirm that after 23 years sitting out in the weather, the gasket on my original cap was quite literally falling apart and undoubtedly what was letting an army of tiny ants into the well every spring. The caulk and duct tape expedient solution applied late last summer was also failing – surely it didn’t look up to withstanding another ant onslaught.

I’m pleased to report that after about three hours of tinkering, a bit of unexpected electrical work to change how power enters the well, and not a little bit of swearing and cursing, I have a brand spanking new well cap with a perfectly intact gasket that has a pretty good chance of resolving my ant problem. We’ll see what things look like when temperatures start climbing into the 70s and 80s. I would dearly love to think that this problem is well and truly resolved, but I’m weighing that hope against almost three years of experience at being disappointed after each new “fix” was applied.

It should be the right solution… in theory. I’m still not throwing away my filter pitchers, bottles, and cartridges.